Nanyang Washer Motor Manufacturer
Do You Know Detection Method of Washer Motor
The washing machine generally adopts a single-phase capacitive Washer Motor , and the washer motor is mainly composed of a stator, a rotor, a main (sub) winding and an end cover. When inspecting the washer motor, open the rear cover and disassemble the motor leads. The specific inspection method is as follows. Motor winding short circuit inspection method:
The washer motor needs to rotate forward and reverse to drive the cycle of the pulsator, so the parameters of the main and auxiliary windings are designed to be the same. Use the multimeter ohms (RX10 ohm or RX1 ohm) to measure the value of the nozzle between the open end and the other two leads. If the measured value is basically - (typically several tens of ohms), the motor is normal. If the measured values differ greatly, the winding with a small resistance has a short circuit.
The main and auxiliary winding parameters of the dehydration motor are different, and the resistance value is measured with a multimeter ohmmeter (Rx10 ohm). If the main winding resistance is 65-95 ohms and the secondary winding is 110~200 ohms (the secondary winding is 508 larger than the main winding resistance), the motor is normal. If it is less than the above resistance, the motor has a short circuit.
Use the multimeter ohmmeter (Rx10 kohm) to measure the lead-to-end and end cap or the resistance between the core, such as the pointer swing, it indicates that the winding insulation is poor, and there is a short circuit between the end cover. Motor winding open circuit inspection method: use the multimeter ohmmeter measurement, when there is no conduction between any two leads, it means that the motor winding has an open circuit. When there is an open or short circuit, rewind the winding or replace the washer motor.
If you interested in nanyang Washer Motor , please check below link: https://www.zjnanyangmotor.com/
Nayang Motor Teach You Replace a Washer Motor
After hundreds and hundreds of loads of laundry, there will come a time when you Washer Motor is finally going to give up and die. When this happens, don’t freak out. You may be stressing out over the cost of having to buy a new washing machine, but why do that when you can simply replace the washing machine motor yourself and save a bundle of cash?
So to activate with, you accept to locate the lug and bolt aperture on the apparatus itself. Take your new abrasion apparatus motor (one that you accept bought already to alter the asleep one), and position the new motor assimilate the lug. This will acquiesce you in accelerate in the application bolt, washer and nut to defended the motor into place. Be abiding to use a atrium bend and a approved bend to ensure that aggregate is bound into abode securely.
Next you accept to alter the belt, artlessly by sliding it assimilate the apparatus aural the apparatus and looping it over the new motor. When you accept that positioned, alter the tensioning bolt, washers and nut. This will lock the motor down. Now bind the belt by affairs the motor boring abroad from the boom of the machine. This will cull the belt taught. This is done by artlessly application your atrium bend and bow-shaped bend to bound the bolt down. Be abiding that your belt can still calmly coast over the gears, but you don’t wish it so lose that it slides off completely.
With your motor anchored in abode and your belt anchored properly, we now about-face our focus to the added end of the motor. Here we are traveling to attending at the base that needs to be done to ensure that your motor is active properly. The aboriginal affair you charge to do is alter the arena wire securely, yet afresh we alarm aloft our accurate atrium bend to bind down the nut and be abiding that the arena wire is deeply attached.
It is up to you to choose whether or not you want to do the work yourself or get a paid professional to do it for you. Ultimately doing it yourself is going to be the most cost effective way to go about it. Of course, only you know just how old your washing machine is and perhaps the hundred dollars would be better used towards buying a brand new machine all together. For more tips, informations about NanYang Motor , you can click https://www.zjnanyangmotor.com/
Large Inventory of Washer Motor II
At present, most of the drum washing machines use DD direct drive motors or BLDC motors. Next, I would like to introduce the two Washer Motor used in the inverter washing machine.
DD Washer Motor is short for the direct drive "Direct Driver". Under the control of the drive system, the direct drive motor directly connects the washer motor to the load and drives the load. The advantage is that its output torque is large, so it can be directly connected to the moving device inside the drum, without connecting through gears, gear boxes, belts and other equipment.
DD motors are generally equipped with higher resolution encoders, plus the direct drive does not require the connection of components, DD washer motor greatly improves the range of speed regulation, and responds faster to speed changes. Since there is no need to go through multiple devices, the resonance caused by the motor during operation is reduced, and the noise is further reduced, further improving the efficiency.
Since the connecting parts are reduced, the service life of the motor as a whole is greatly improved. On the other hand, because the structure of the DD motor is different from other motors, it is necessary for the washing machine manufacturers to further adjust the installation mode, which also increases the cost. Therefore, DD direct drive motors are often used in high-end products.
BLDC is short for "Brushless Direct Current", which is a brushless DC motor. The brushless "brush" refers to a brush mounted on the stator of the motor, and its function is to alternate the current direction through the coil. The BLDC motor uses an electronic commutator that responds quickly to operation and has a large starting torque.
The brush on the stator often generates sparks due to friction when the motor is working. The toner generated by the friction will also damage the internal parts, and the BLDC motor that eliminates the brush interference has the low cost of the DC brush motor with high efficiency. However, it is worth mentioning that the BLDC motor still uses the traditional belt connection method, which is easy to slip in the case of water vapor.
Huzhou Nanyang Electric-Motor Co., Ltd can develop and manufacture washer motor according to customer’s drawing or sample, if you wanna know more information about NanYang Motor , please click zjnanyangmotor.com
Nanyang Motor will Be An Optimal Choice
It is often referred to as an AC series motor. The universal motor is very similar to a DC series motor in construction but is modified slightly to allow the motor to operate properly on AC power. This type of electric motor can operate well on AC because the current in both the field coils and the armature (and the resultant magnetic fields) will alternate (reverse polarity) synchronously with the supply.
Tach Coil is an essential port of Washer Motor . In the back side of the motor, you can find the tach coil with we will not use but is good to know if you need to replace it with spare parts if this one is gonna break. By the name, I am guessing that with this component the washing machine controller is sensing the rpm of the motor and it regulates the speed according to the faze of the program.
washing Machine Motor Specs is also of great importance. Universal motors have high starting torque, can run at high speed, and are lightweight and compact. They are commonly used in portable power tools and equipment, as well as many household appliances. They're also relatively easy to control, electromechanically using tapped coils, or electronically. However, the commutator has brushes that wear, so they are much less often used for equipment that is in continuous use. In addition, partly because of the commutator, universal motors are typically very noisy, both acoustically and electromagnetically.
Nanyang is a professional washer motor manufacturer. If you interested in learn more information about NanYang Motor , please feel free to contact us at any time for more information. Our company would like to sincerely invite the global prospective customers to pay a visit and have a good cooperation for a splendid future together. Click zjnanyangmotor for more information about nanyang motor.
Application of Nanyang Washer Motor
Motor Wiring Diagram of Washer Motor
It is from a washing machine motor Indesit repurposed in a dc operated a motor by watching the original connection we will find that is got 8 pins starting with the tacho coil 8+7 that I showed previously we will not use in this configuration. Moving down 6 is not connected 5+4+3 is the stator connection which looks like a single coil with 2 connection and another additional center tap connection. The last 2+1 pins are the brushes that you will find on the side a carbon road incarcerated in a black plastic cover.
Washing Machine Motor Direct Wire of Washer Motor
Even when used with AC power these types of motors are able to run at arotation frequency well above that of the mains supply, and because most electric motor properties improve with speed, this means they can be lightweight and powerful. However, universal motors are usually relatively inefficient: around 30% for smaller motors and up to 70-75% for larger ones
The connection of this motor for the direct drive using it for a period of time with no controller in low application like a belt sander, electric bike, electric boat, wood splitter and more.
Washer Motor Is Very Useful
Operating at normal power line frequencies, universal motors are often found in a range less than 1000 watts. Their high speed makes them useful for appliances such as blenders, vacuum cleaners, and hair dryers where high speed and light weight are desirable. They are also commonly used in portable power tools, such as drills, sanders, circular and jig saws, where the motor's characteristics work well. Many vacuum cleaner and weed trimmer motors exceed 10,000 RPM, while many Dremel and similar miniature grinders exceed 30,000 RPM.
Universal motors also lend themselves to electronic speed control and, as such, were an ideal choice for domestic washing machines. The motor can be used to agitate the drum (both forwards and in reverse) by switching the field winding with respect to the armature. The motor can also be run up to the high speeds required for the spin cycle. Nowadays, variable-frequency drive motors are more commonly used instead. if you interested in learn more information about NanYang Motor , please click zjnanyangmotor.com
